- 1). Select your surface carefully. Avoid porous, rough-textured surfaces, and opt instead for glass, tile or stainless steel.
- 2). Look for the largest suction cup possible to get the best suction against the surface.
- 3). Clean the surface and the inside of the suction cup. Wipe up all dust and dirt which prevent an air-tight seal from forming. Use alcohol as a glass and surface cleaner to remove all grease and oils from the surface and from fingerprints.
- 4). Wipe all the cleaner off with paper towels to avoid getting fabric fibers on the cleaned surface.
- 5). Moisten the inside of the suction cup with water, and press squarely against the surface.
- 6). Remove a suction cup by peeling up the sides rather than trying to pull straight from the middle.
SHARE
