- 1). Place a pair of rubber gloves on your hands, unplug your water cooler and remove the water bottle.
- 2). Discard any water from the bottle and refill with 1 tbsp. bleach per gallon of hot water, filling the bottle halfway.
- 3). Place your hand tightly over the bottle opening, and shake the bottle for about 30 seconds.
- 4). Flip the bottle over and onto the water dispenser, and place a bucket under the dispenser faucet.
- 5). Release all water from the bottle through the faucet.
- 6). Remove the water bottle from the unit and rinse out the water bottle with hot water.
- 7). Fill the reservoir of the dispenser with hot water and discard through the faucet. Repeat this four times to be sure all bleach solution is flushed out of the unit.
- 8). Wipe down the faucets and handles with a damp sponge.
SHARE
