Electrical contractors and electricians have become general per-requisites nowadays as many residential or commercial electrical works are becoming a part of infrastructural growth. One of the few things that need to be considered while hiring a contractor is to check their license. Checking the license is one the best ways to know your contractor.
Checking a contractors' license can tell you that:
1. The contractor/electrician is fully capable of handling the required electrical applications.
2. The contractor has a surety bond.
3. The contractor has a liable insurance and proof of to show it.
4. The contractor carries Workers' Comp Insurance to protect its workers on the project.
Remember: If you do not hire a licensed contractor then you will lose the ability to recover damages through the bond as well as the CCB Dispute Resolution Service (DRS).
Different License and Different work permit.
While checking a license, it is important to know that different kinds of licenses are needed for a contractor or an electrician to carry out certain types of works in Portland, Oregon.
The first thing you should check is whether a contractor has an Oregon's Construction Contractors Board (CCB) license. This license is required by every contractor working in Portland or Oregon using the permit online system (place where they can purchase different fixtures packages).
CCB also maintains a record about any claims filed against any contractors. Similarly, it ensures all of the things mentioned above.
There might be different types of works for which you might need an electrician. Based on the work you need to check their permits i.e. whether they have the permit to carry out that particular kind of work.
Electrical permit (ET) is needed to:
1. Install, change or repair any hard wired electrical system.
2. Replace a service panel.
3. Run additional wiring.
4. Put in any additional electrical outlet or light fixture.
5. Install or replace air conditioners.
6. Install or alter low voltage systems such as security alarms, stereo, computer or phone systems.
7. Change your fuse box to circuit breakers.
Electrical permit is not need to:
1. Repair appliance cords.
2. Replace a fuse.
3. Replace the existing dishwasher or electrical water heater.
CCBs license is also required for those:
1. Who purchase homes, fix them up themselves and sell them.
2. Who supply material and receive compensation for installing or arranging the installation of the materials.
Depending on the type of license, the contractors are allowed to work only on the residential and small commercial projects or also the large commercial business. It is important to figure this out while checking a contractor's license.
The materials used by the contractors also have license numbers on them. You might want to check this too.
Overall, in Portland, Oregon, every electrical contractors or electricians need certain types of licenses and permits to carry out different kinds of electrical work. Checking such license and permits ensures every customer that the work will be done properly and safely. It's always a good idea to do so.
Checking a contractors' license can tell you that:
1. The contractor/electrician is fully capable of handling the required electrical applications.
2. The contractor has a surety bond.
3. The contractor has a liable insurance and proof of to show it.
4. The contractor carries Workers' Comp Insurance to protect its workers on the project.
Remember: If you do not hire a licensed contractor then you will lose the ability to recover damages through the bond as well as the CCB Dispute Resolution Service (DRS).
Different License and Different work permit.
While checking a license, it is important to know that different kinds of licenses are needed for a contractor or an electrician to carry out certain types of works in Portland, Oregon.
The first thing you should check is whether a contractor has an Oregon's Construction Contractors Board (CCB) license. This license is required by every contractor working in Portland or Oregon using the permit online system (place where they can purchase different fixtures packages).
CCB also maintains a record about any claims filed against any contractors. Similarly, it ensures all of the things mentioned above.
There might be different types of works for which you might need an electrician. Based on the work you need to check their permits i.e. whether they have the permit to carry out that particular kind of work.
Electrical permit (ET) is needed to:
1. Install, change or repair any hard wired electrical system.
2. Replace a service panel.
3. Run additional wiring.
4. Put in any additional electrical outlet or light fixture.
5. Install or replace air conditioners.
6. Install or alter low voltage systems such as security alarms, stereo, computer or phone systems.
7. Change your fuse box to circuit breakers.
Electrical permit is not need to:
1. Repair appliance cords.
2. Replace a fuse.
3. Replace the existing dishwasher or electrical water heater.
CCBs license is also required for those:
1. Who purchase homes, fix them up themselves and sell them.
2. Who supply material and receive compensation for installing or arranging the installation of the materials.
Depending on the type of license, the contractors are allowed to work only on the residential and small commercial projects or also the large commercial business. It is important to figure this out while checking a contractor's license.
The materials used by the contractors also have license numbers on them. You might want to check this too.
Overall, in Portland, Oregon, every electrical contractors or electricians need certain types of licenses and permits to carry out different kinds of electrical work. Checking such license and permits ensures every customer that the work will be done properly and safely. It's always a good idea to do so.
SHARE
