But in the rest, you would not be getting paranoid about anything. You only need to ensure that a few parts of wall mounting aspects are properly connected and you have to use right tools and equipments to fix the TV wall mount. Primary and obvious step is to remove the TV stand from the bottom of the TV monitor. Remove any screws that connect the stand and the monitor. To keep the TV face down, use a soft blanket.

If you open the wall mount, it will display two components. One is the monitor attachment and the other is wall bracket. Use the television manual to place the positions of the holes on the rear of the monitor. This is the place where the attachments can be held together with screws. Todays television comes with holes that are covered with PVC or plastic caps. You have to remove these caps to display the screw holes. Choose the right series of holes for fixing the brackets to the bottom of television. Now secure the attachment properly to the rear of the television. One of the most crucial chores in the entire process is hanging the wall bracket. Decide the amount of height to place your television on the wall.

Once you have decided the height, locate the two studs with a stud locator. Place them from 12 to 16 inch apart. Locate the center of the stud and drill the holes. Place the wall brackets against the wall and firmly fix them in to the places with approved size screws. Intense care and attention should be taken while placing the monitor on the wall mount. Ensure that all fittings and screws are installed firmly and nothing is left out of place. With right TV wall mount, your flat screen TV will look beautiful and elegant.