- 1). Turn on the Phillips DVD player.
- 2). Move the slide switch on the DirecTV remote to the AV1, or AV2, position.
- 3). Press the "Select" and the "Mute" buttons. Hold until you see a green light flash twice under the AV1, or AV2, and then release. Enter the code for the Phillips DVD using the number keypad at the bottom of the remote.
- 4). Use the Phillips DVD player code 20503. If you entered the number correctly, a green light will flash twice under the TV at the top of the remote by the slide switch. Point the remote at the DVD player and press the power button on the remote. If the code was the correct one, the unit will power down and up. If not, go to step 5.
- 5). Repeat steps 3 and 4 if the DVD did not power down with that code. Replace the "20503" code with each one of these codes: 20539, 20646, 20885, and 20854--until the remote powers down the DVD player.
SHARE