- 1). Lay out the piece fleece flat on clean, dry surface and smooth out any wrinkles. The fleece should be right side facing down.
- 2). Set the empty subwoofer box down on top of the fleece and center it so the fleece surrounds the box evenly on all sides.
- 3). Pull one side of the fleece up and around the subwoofer box and staple the fabric in place with a staple gun. The staple should be on the nearest point of subwoofer opening or on the inside of the box to make them invisible when the box is installed.
- 4). Attach the side of the fabric directly opposite from the first point of attachment and secure it in the same way.
- 5). Work around the box in the same way until all of the fabric is attached. Pick up one side and then go to the opposite side and do the same.
- 6). Trim away any excess fleece from inside the subwoofer box with scissors to eliminate the bulk of the fabric.
SHARE
