The fallopian tube is a muscular organ extending from the uterus and ending next to the ovary. The tube is attached to the ovary by a small ligament. The inner tubal lining is rich in cilia. These are microscopic hair-like projections that beat in waves that help move the egg or ovum to the uterus in conjunction with muscular contractions of the tube. The fallopian tube is normally about 10 cm (4 inches) long and consists of several segments. Starting from the uterus and proceeding outward, these are the: * Interstitial segment - extends from the uterine cavity through the uterine muscle * Isthmic segment - narrow muscular portion adjacent to the uterus * Ampullary segment - wider and longer middle part of the tube * Infundibular segment - funnel shaped segment next to the fimbrial end * Fimbrial segment - wide opening at the end of the tube facing the ovary Tubal reversal procedures Tubal ligation reversal utilizes the techniques of microsurgery to open and reconnect the fallopian tube segments that remain after a tubal sterilization procedure[1][2]. Microsurgery minimizes tissue damage and bleeding during surgery. Essential elements of microsurgical technique include gentle tissue handling, magnifying the operating field, keeping body tissues in their normal state with warmed irrigation fluids, and using the smallest sutures with the thinnest needles capable of holding the tubal ends together to promote proper healing of the rejoined tubal segments. Tubotubal anastomosis Following a tubal ligation, there are usually two remaining fallopian tube segments - the proximal tubal segment that emerges from the uterus and the distal tubal segment that ends with the fimbria next to the ovary. After opening the blocked ends of the remaining tubal segments, a narrow flexible stent is gently threaded through their inner cavities or lumens and into the uterine cavity. This ensures that the fallopian tube is open from the uterine cavity to its fimbrial end. The newly created tubal openings are then drawn next to each other by placing a retention suture in the connective tissue that lies beneath the fallopian tubes (mesosalpinx). The retention suture avoids the likelihood of the tubal segments subsequently pulling apart. Microsurgical sutures are used to precisely align the muscular portion (muscularis externa) and outer layer (serosa), while avoiding the inner layer (mucosa) of the fallopian tube. The tubal stent is then gently withdrawn from the fimbrial end of the tube. Tubouterine implantation In a small percentage of cases, a tubal ligation procedure leaves only the distal portion of the fallopian tube and no proximal tubal segment. This may occur when monopolar tubal coagulation has been applied to the isthmic segment of the fallopian tube as it emerges from the uterus. In this situation, a new opening can be created through the uterine muscle and the remaining tubal segment inserted into the uterine cavity. This microsurgical procedure is called tubouterine implantation, uterotubal implantation, or, simply, tubal implantation. Tubal implantation is performed when tubal anastomosis is not possible due to the absence of a proximal tubal segment and interstitial tubal lumen.