- 1). Turn the lock wheel, found near the top of the cutter, counterclockwise to choose the cutting size you desire.
- 2). Lock the cutting arm by turning the lock wheel clockwise.
- 3). Place your cutting mat down where you plan to use the cutter.
- 4). Lay your paper or other material down on the mat and place the cutter on the area you wish to cut. Look through the clear base to ensure the circle is in the correct position.
- 5). Hold onto the cutter with one hand and push the control knob, on top of the cutter, down with your fingers on your other hand. Press down on the cutter firmly and rotate the cutter around 360 degrees until your circle is cut out.
- 6). Replace the old blade if it is not cutting properly. Pull the old blade carriage from the cutting arm by pulling it down and out of the cutting arm. Take a new blade out of the blade storage compartment and insert it where the old blade was removed from. Keep your blades stored in the blade storage compartment when you are not using your cutter.
SHARE
