- 1). Fill the water storage tank with water if the "Add Water" indicator is on. The indicator is a sign that there is not enough water to produce ice.
- 2). Remove ice from the ice bucket if the "Ice" indicator is on. This indicator means that the ice bucket is full.
- 3). Check to see if the ice shovel is stuck if both the "Add water" and "Ice" indicators are blinking. If the shovel is blocked by ice, so take out the ice cubes and restart the ice maker.
- 4). Press the "Stop" pad and allow the ice to melt if ice cubes are sticking together. Press the "Select" button until the "Small" ice size on the panel is illuminated. Press "Start" to restart the device.
- 5). Change the water in the reservoir if ice cubes stick together, as this is a sign that the water temperature in the inner tank is too low. Make sure the ice maker is being used in a room with a temperature between 45 and 90 degrees Fahrenheit.
SHARE
