- 1). Open the driver door and roll down the window all the way.
- 2). Stating at one end of the weatherstripping, pull off the stripping with your hands. If you are having trouble swab some acetone inside of the stripping to help release it.
- 3). Clean the entire area where the weatherstripping once was with a swab and acetone. Make sure to get all of the old adhesive off of the car.
- 4). Apply a line of new adhesive into the groove where the weather stripping will go. Also apply a line of new adhesive onto the part of the weatherstripping that will be pushed into the groove.
- 5). Push the weatherstripping firmly into the groove on the door and hold it there for 10 minutes.
- 6). Repeat steps one through five on the other door.
SHARE
