Instructions

• 1). Paint or stain the cabinet to desired color. Allow to dry.
  
  
• 2). Apply polyurethane to all finishes. Apply two to three coats, allowing to dry in between applications.
  
  
• 3). When it's completely dry, turn the cabinet over and attach one wheel or caster in each corner of the cabinet's base. Be sure to drill pilot holes first so the screws do not splinter the wood.
  
  
• 4). Set the cabinet upright on the casters, and attach the bar handle to the back side of the cabinet at the top. You will use this to push and pull the cabinet around.
  
  
• 5). Apply wood glue to all surfaces of the top of the cabinet, and place the countertop on the top of the cabinet. Allow to dry.