- 1). Inspect the lug nuts. You want your lug nuts threads to look new and not worn, so they will work efficiently and safely. If your lug nuts look worn or threadbare, you should replace them.
- 2). Install the valve stem on your tire by putting a bit of lubricant on it and sliding it through the valve stem hole.
- 3). Use a tire mounting machine to put the tires on the rim. Follow the manufacturer's directions. If you don't have a tire mounting machine you can take them to an automotive shop to have them mounted. You will also need to have your tires balanced. You can do this at home with a wheel balancing machine but it is usually done in an automotive shop by technicians. Goodyear Tires recommends you have your wheels mounted and balanced professionally.
- 4). Check the disc brake caliper clearance to make sure nothing will rub when the car is in motion. Look for a three-millimeter clearance around the caliper and wheels and rim.
- 5). Tighten all the lug nuts. Your car's manufacturer will have a specific torque range, usually between 70 and 80. Refer to your manual for recommendations. It's a good idea to recheck the lug nuts after you have driven about 50 miles to ensure they are still tight.
SHARE
