With the Password

• 1). Connect to the Internet using the wireless network.
  
  
• 2). Access the SpeedTouch Web page through your Web browser (see "Resources"). You must be connected to your SpeedTouch network for this to work.
  
  
• 3). Select "Home Network" from the menu.
  
  
• 4). Click your WLAN.
  
  
• 5). Click "Configure" at the top right of the screen.
  
  
• 6). Go to the "Wireless Access Point" page to modify the security settings. Select the "Disabled" button and click "Apply."
  
  

Without the Password

• 1). Make sure the router is turned on.
  
  
• 2). Push the "Reset" button on the back of the router for seven seconds using a pen or pencil. The power LED will turn red if you have pressed it long enough.
  
  
• 3). Release the button and wait for the router to restart.
  
  
• 4). Go to the configuration website using the steps in Section 1 to reconfigure the router however you please.