- 1). Turn off the pool filter and chlorine generator cell immediately prior to adding salt. Do not leave the filter or chlorine generator cell off for several hours, because they are necessary for maintaining clarity and bacteria control in a saltwater pool.
- 2). Pour all the Epsom salt onto the swimming pool floor. Evenly distribute it to speed dissolution. To distribute the salt evenly, walk around the perimeter of the pool and pour small piles at short intervals.
- 3). Allow the Epsom salt to dissolve in your pool for approximately two hours, spreading the piles with a pool net if necessary.
- 4). Turn on the pool filter and the chlorine generator cell. Allow the filter and the chlorine generator cell to circulate water for at least six hours. Depending on the size and capacity of your filter, you may allow the water to circulate longer for maximum effectiveness. When the water has circulated to your satisfaction, turn the filter and chlorine generator cell off and clean them according to the manufacturer's instructions.
SHARE
