- 1). Open the glove box and empty it of any contents.
- 2). Remove the two screws located in the top of the F-150's glove box with a flat head screwdriver.
- 3). Pull down on the glove box to separate it from the bottom of the dash. Allow the box to hang.
- 4). Locate the rectangular plastic filter housing above the glove box housing and pry it off with your hands.
- 5). Pull the old filter out of the filter housing and push the new filter into the housing until it seats against the back of the filter housing.
- 6). Place the cover onto the filter housing and push it into place. The cover has two tabs that snap into place as you push on it.
- 7). Push the glove box back against the dash and secure it with the two screws and the flat head screwdriver.
- 8). Place the contents of the glove box back into the glove box and close the door.
SHARE