- 1). Stand next to the truck and lift the blade and arm away from the glass. Locate the locking tab on the wiper blade adapter over the mounting pin at the center of the wiper blade.
- 2). Pry the locking tab up with a small, flat screwdriver then pivot the adapter up and away from the mounting pin in the center of the blade. Slide the blade off the arm and discard it.
- 3). Slide the new wiper blade onto the mounting pin and snap the adapter in the center of the arm over the pin. Make sure it snaps all the way onto the pin or the blade may come off the arm when the wipers are switched on.
- 4). Carefully lower the blade and arm onto the glass, then move to the other side of the truck and repeat the process.
SHARE
