- 1). Start by removing the factory headlight wiring harness, pull off your rubber boot, and remove the original headlights.
- 2). Get your HID headlight bulb. Install it into the headlight assembly.
- 3). Find a good place to mount your ballast. Make sure the wires could plug into it.
- 4). Connect your high pressure electrical wires.
- 5). Connect your power wires to the terminals of your battery.
- 6). Secure your relay somewhere safe. I usually use zip ties to secure my relay.
- 7). Now plug your wire into your ballast. Plug the other wire into your wiring harness for the headlight. So that's it, you are done. Test the lights to make sure it works. Make sure you turn off your headlights when the car is not running. These lights will not turn off automatically.
SHARE
