- 1). Check your load if your dryer is rotating slowly. If the load is too large and heavy, the dryer will rotate slowly, and clothes won't dry satisfactorily. Separate the load to tumble freely. If your clothes are heavy, load a few of them each drying cycle.
- 2). Turn off the dryer and open the door if you are still running into slow rotation problems. Pull out the lint screen from the compartment on the bottom of the dryer's mouth.
- 3). Roll lint off the screen with your fingers. If it's really dirty, wet it with hot water.
- 4). Wet a nylon brush in hot water and detergent solution, and then brush the lint screen. Dry the screen with a clean town, and then reinstall it.
- 5). Inspect the air outlet grille inside the door behind the lint screen. Remove any dryer sheets that may be blocking airflow.
- 6). Adjust the sensor cycle settings if your still experiencing slow rotation problems. To do so, turn off your dryer, and then press and hold the "TEMP LEVEL" button for six seconds.
- 7). Press the "TEMP LEVEL" button again to select the dryness level shown on the time display, and then press the "START/PAUSE" button to save the new dryness level setting.
SHARE