- 1). Place the motorcycle jack under the engine block and raise the motorcycle off the ground.
- 2). Remove the front tire's axle securing nut using the wrench. Hammer out the axle and pull the front tire off the frame.
- 3). Loosen the fork securing clamps on the top of the handle bars using the large Allen wrench. Once the clamps are loose, pull the fork off the frame. Lay the fork on a padded surface.
- 4). Place the fork into a drain pan and remove the drain nut from the bottom of the fork. Drain the fork oil into the drain pan. Use the flat head screwdriver to pry the fork seal off the fork. Pull the fork seal up the fork to the top and remove it.
- 5). Slide the new fork seal onto the fork and down to the fork seal fitting. Press down on the fork seal until the new fork seal locks into place. Replace the fork to the handle bars. Tighten the securing clamps. Replace the front tire to the frame. Replace the axle to the tire. Replace and tighten the securing nut on the axle.
SHARE
