- 1). Check the electrical source. The problem could be a tripped circuit breaker, blown fuse or even a faulty wire. If these all check out, try testing the outlet with a voltage meter or outlet tester to ensure the problem is not a blown outlet. Plug the tester into the outlet, if it lights up then it is working properly.
- 2). Test the heating elements of your dryer along with the thermostat. Often a dryer will continue tumbling without producing heat. To check this you will need an ohmmeter and your owner's manual. Each manufacturer will be different, so follow the manual's instructions for determining proper ohm readings. You need to connect the testing wires to the ohmmeter. The black wire goes to the ground outlet, the red wire to the volt/ohms outlet, then check the owner's manual for the normal range of resistance for the circuit you are testing.
- 3). Clean the lint trap and check the exhaust hose. If clothes are taking too long to dry, the problem may be escaping heat. Straighten any kinks in the hose and check the connection to the outside exhaust point for a secure link.
- 4). Level the dryer if it is producing excessive noise. All dryers come with simple leveling screws in each corner, and over time these may loosen, causing the machine to rock. Use a regular carpenter's level to gain accurate reading.
SHARE
