- 1). Disassemble the pen by twisting the pointed end to remove the point. Pull out the plastic tube containing the ink, along with the springs. Remove the top of the pen as well. Throw all the items in the trash except for the plastic tube with the ink and the pen body, which should be removed of all other parts.
- 2). Put a page of a newspaper onto a table. Put the pen onto the newspaper with the pointed side facing your right side.
- 3). Drop a bit of bonding glue onto the pen, just in front of its top end. Put the end of a rubber band onto the glue and let it dry for one hour.
- 4). Rotate your pen at half its circumference away from you. Put a bit of bonding glue onto the opposite side of the top of the pen. Put the other end of your eraser band on the bonding glue and let it dry for one hour.
- 5). Put an end of the plastic tube in the rubber band end of the pen. Put a bit of bonding glue onto the other end of the plastic tube. Place the middle of your rubber band against the glue and let it dry for an hour.
- 6). Push your plastic tube fully into the pen.
- 7). Roll up a small piece of newspaper and put it in your mouth to moisten it. Put it in the tip of your blow dart gun. Pull back on the tube and elastic band and release. The tube will create enough air momentum inside the pen to blow the newspaper out.
SHARE
