- 1). Use the jack to lift up the front of the car and then set a pair of jack stands underneath the jack points on the sides of the car. Remove the front wheels using the tire iron.
- 2). Unbolt the brake caliper from the steering knuckle using the 3/8-inch ratchet and the hex-head sockets. Form a loop over the coil spring using the mechanics wire. Remove the caliper from the rotor, loop the wire through the caliper, and twist the two ends of the wire together using the pliers to support the caliper.
- 3). Lift the rotor off of the brake hub using both hands.
SHARE
