- 1). Connect the vacuum head to the handle and hose, then drop the vacuum head into the bottom of the pool and wait for it to sink and fill up with water. The other end of the hose should be out of the water.
- 2). Put the skimmer basket adapter onto the top of the skimmer basket. The basket should prevent large items from getting trapped in the underground line.
- 3). Turn the suction valve to the "Filter" or "Skimmer" setting, unless the pool is exceptionally dirty. If so, you may want to set the valve to "Waste."
- 4). Roll the vacuum head across the entire pool slowly. As you move the vacuum head, it will pick up the lose debris and send it to the filter. If you cannot remove all of the debris on the first pass, roll the vacuum head over the location again, in the same way that you would if you were vacuuming carpet.
SHARE
