- 1). Enter your six-digit programming code into the keypad. Wait for the "Schlage" button at the top of the keypad to flash amber three times with three beeps. The "Schlage" button will remain a steady amber color.
- 2). Press the "Schlage" button and the "1" on the keypad to add a user or the "Schlage" button and the "2" to delete a user. Wait for the "Schlage" button to blink three times and beep three times.
- 3). Enter a new four-digit user code if adding a user or the existing four-digit code of a user you are deleting. The "Schlage" button will flash three times with three beeps. Enter the same four digits again and the button will illuminate green with a long beep to indicate the change has taken place.
- 1). Input your current six-digit programming code into the keypad and wait for the "Schlage" button to flash amber three times with three beeps.
- 2). Press the "Schlage" button and the "3" on the keypad. The "Schlage" button will blink three times with three beeps.
- 3). Enter a new six-digit programming code into the keypad and wait for the "Schlage" button to blink three times with three beeps. Enter the new six-digit number again and the "Schlage" button will turn green with one long beep, signaling the new code was accepted.
Add and Delete User Codes
Change Programming Code
SHARE