- 1). Enter your car and leave the driver's door open.
- 2). Insert your key into the ignition and turn it to the "Run" position.
- 3). Press and release the "Valet" button on the remote. Do this once to program the alarm, twice for the trunk release and three times for the remote start.
- 4). Press and hold the "Valet" button again, wait for the horn to chirp, and then press the button on your remote that you would like to program.
- 5). Wait for the horn to chirp again, press and release the "Valet" button again, and the programming will be completed.
SHARE
