- 1). Climb under the vehicle below the driver's seat area with the drain pan, tool and new filter.
- 2). Follow the fuel line forward from the fuel tank to locate the fuel filter, which is in the fuel line approximately half way between the tank and engine. If you've never seen a fuel filter before, familiarize yourself with the look of the new one prior to climbing under so you can easily spot the old one.
- 3). Pull the fuel-line retaining clips (located in the ends of the fuel lines where they connect to the filter) outward from the line using the fuel-line disconnect tool. Work these clips gently, as they break easily and you can only replace them by purchasing an entire fuel line.
- 4). Pull both fuel lines off the filter by hand. Pull the old filter out of the retaining strap and put it in the catch pan.
- 5). Insert the new filter with the flow arrow pointing forward, and reinstall the fuel lines by hand. Gently push the clips back into place in the fuel-line ends and climb out from under the truck.
- 6). Climb into the driver's seat and insert the key into the ignition. Turn the key to the run position and count to ten and then shut the key off. Turn it back to the run position once more, count to ten a second time and then start the truck.
SHARE