- 1). Open your rope light mounting clip kit and separate the rope light clips from the screws. The clips generally look like soft plastic horseshoe shapes with side flaps coming off the rounded part of the horseshoe. The flaps have one or two screw holes.
- 2). Position a rope light clip about 1 1/2 inches from any corner where you want your rope light to change direction. Screw the clip into the wall with the provided screws and a hand-held screwdriver. Powered drivers may strip the screw heads. Use one clip at the 1 1/2-inch position on each side of the corner.
- 3). Install another clip approximately every foot along the length of your rope light's intended path.
- 4). Press your rope light into the clips after all clips are installed.
SHARE
