- 1). Mix 1 part chlorine with 4 parts water, unless otherwise directed on the chlorine packaging, in a 5-gallon bucket.
- 2). Soak a 6-inch masonry brush in the chlorine mixture and, wearing rubber gloves, scrub the concrete pavers; allow the chlorine mixture to soak for about 10 minutes before moving on.
- 3). Rinse the pavers using a pressure washer with clean water and let them dry.
- 4). Apply concrete sealer to the pavers using a garden sprayer; refer to sealer packaging for any additional coat or special application instructions.
SHARE
