- 1). Lift up on the cocking knob to allow the Delrin bolt to slide out of the rear of the receiver.
- 2). Hold the striker plug in place with one hand and remove the quick disconnect pin from the side of the paintball gun with the other hand, allowing removal of the striker plug. Ensure that the paintball gun is in the uncocked position before attempting to remove the quick disconnect pin.
- 3). Remove the internal parts of the gun, consisting of the velocity adjuster, striker spring, striker buffer and striker bolt from the back of the receiver, completing the disassembly of a spider Victor. After cleaning, reassemble the gun in reverse of the way you took it apart.
SHARE
