- 1). Remove the end caps, if any are present, after loosening the end cap screw with an Allen wrench.
- 2). Remove the rear heat shields on both the front and rear mufflers by loosening the hose clamps with a flat head screwdriver. Pull the heat shields off with your hands.
- 3). Loosen the single baffle screw on the bottom of each muffler with an Allen wrench. Save the screws. Pull out the old baffles with your hands.
- 4). Slide the new Quiet Baffles into both mufflers, ensuring that the baffles' screw holes face down.
- 5). Align the screw holes in both baffles with the screw holes in both muffler shells. Tighten both baffle screws with an Allen wrench.
- 6). Slip the heat shields back onto the front and rear exhausts. Tighten the heat shields to the exhaust pipes with a flat head screwdriver.
- 7). Replace the end caps, if necessary, using the screws you just removed and an Allen wrench.
SHARE
