How to Make & Grow a Mushroom Bed

Build the Mushroom Bed

1). Use a shovel to dig a hole that is between 4 to 5 inches deep and 32 feet long by 32 feet wide. This is the base of your mushroom bed. Make sure you dig the bed in a shady area of your yard and, if possible, within reach of your water hose.
2). Take half of the wood chips --- approximately 16 lbs. --- and spread them across the bottom of your hole. Your wood chips should be moist at this point. Keep them wet for 12 hours before you use them, and allow the excess water to drain off.
3). Place the mushroom spawn on the pile of wood chips. You can spawn the mushrooms yourself, but it takes a lot of preparation and a few thousand dollars' worth of equipment. It is best when you begin to cultivate your own mushrooms to buy mushroom spawn from a supplier.
4). Spread the spawn across the entire bed of wood chips. Make sure you have an even distribution of the mushroom spawn.
5). Add water to the straw. Once the straw is moist, layer it across the bed. The straw should be approximately 2 inches thick. This is a casing layer, and it helps to prevent your mushroom bed from drying out.
6). Distribute the rest of the wood chips across the mushroom bed. Water the bed, using a hose, as soon as you cover it with the wood chips.

1). Water the bed every day.
2). Allow the mushroom spawn to spread out. The spawn has run through when the gray to white mycelium of the mushroom is visible throughout the bed.
3). Add more casing material, such as dung or peat moss, two weeks after you see the mycelium spread throughout the bed. This material promotes the mushroom growth.
4). Pick the mushrooms when the fruiting caps appear. The cap is the edible piece. Twist the cap off and pull up in one motion to successfully remove the mushroom. Brush it off to remove all of the casing material and other organic debris.