- 1). Plug one end of a subwoofer cable into the LFE output on the rear panel of your receiver or preamplifier. Push the plug completely into the jack.
- 2). Plug the other end of this cable into your amplifier's mono input jack, located on the rear panel of the amplifier. This is usually labeled MONO IN.
- 3). Connect the speaker wire lead marked "+" to the red terminal on the rear of the amplifier by pushing down on the terminal until a hole opens in the terminal. Insert the wire and release the terminal to clamp the wire securely.
- 4). Connect the speaker wire lead marked "-" to the black terminal on the rear of the amplifier by pushing down on the terminal until a hole opens in the terminal. Insert the wire and release the terminal to clamp the wire securely.
- 5). Connect the two speaker wire leads to the speaker inputs of the subwoofer module, using the method described above.
SHARE
