How to Recover Data If the Active Partition is Unable to Boot
(Recovering the data,when active partition cannot be booted.)
Everyday the world is seeing new development in the technology sector and everything is moving at a very fast pace. Computer has developed so much within a short duration and as technology develops the need for more advanced technology is what people begins to expect. These days the hard disks are coming in a various range of storage space. Though at times, these hard disks can suffer loss of data and in those situation it would be needed to recover the data which would require some utilities to get back the data that were stored before.
Situation:
Once you turn on the computer and find that it reboots the system or displays an error message. One reason for this is that while booting occurs the computer is getting hanged. The error is due to BIOS, which shows any of these .
"DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
OR
"CMOS Battery State Low"
OR
"CMOS Checksum Failure"
OR
"K/B Interface Error"
BIOS which stands for Basic Input Output System; is basically a software whose main function is to maintain the basic functions of a computer, such as booting control of keyboard, and hardware configuration of computer. BIOS provides instruction to the hardware to function and is not dependent on the operating system. Therefore, it can be understood that this is very much vital for the computer to operate and any loss to it would ultimately result in the computer system to crash to loss of data. Then, recovery of the hard drive would be needed.
Reasons for this occurring:
Misconfiguration of BIOS.
The power supply might be not functioning properly.
There might be problems in connection within the computer.
Computer hardware might not be compatible with the Operating System.
These all would eventually result in loss of essential information that are present on the hard disk.There are several options to be considered in order to allow this situation to be resolved. Although,in case none of the method work, a software has to be used to recover the information on the hard disk.
Resolution steps:
In order to fix this problem a series of steps can be followed:
First see what the error message displays and find a suitable solution to the problem.
Clear CMOS and then reset the BIOS.
The power supply has to be checked as this might be one of the main reason for the problem to occur.
The connections inside the computer can be checked again.
Hardware inside the computer needs to be checked and whether they are compatible with the Operating system of the computer.
With the help of this small steps the problem might be solved; though if the problem continues then it would need the use of more sophisticated software which would allow data to be recovered. This software is very effective and ensures that the data can be brought back safely.
(Recovering the data,when active partition cannot be booted.)
Everyday the world is seeing new development in the technology sector and everything is moving at a very fast pace. Computer has developed so much within a short duration and as technology develops the need for more advanced technology is what people begins to expect. These days the hard disks are coming in a various range of storage space. Though at times, these hard disks can suffer loss of data and in those situation it would be needed to recover the data which would require some utilities to get back the data that were stored before.
Situation:
Once you turn on the computer and find that it reboots the system or displays an error message. One reason for this is that while booting occurs the computer is getting hanged. The error is due to BIOS, which shows any of these .
"DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
OR
"CMOS Battery State Low"
OR
"CMOS Checksum Failure"
OR
"K/B Interface Error"
BIOS which stands for Basic Input Output System; is basically a software whose main function is to maintain the basic functions of a computer, such as booting control of keyboard, and hardware configuration of computer. BIOS provides instruction to the hardware to function and is not dependent on the operating system. Therefore, it can be understood that this is very much vital for the computer to operate and any loss to it would ultimately result in the computer system to crash to loss of data. Then, recovery of the hard drive would be needed.
Reasons for this occurring:
Misconfiguration of BIOS.
The power supply might be not functioning properly.
There might be problems in connection within the computer.
Computer hardware might not be compatible with the Operating System.
These all would eventually result in loss of essential information that are present on the hard disk.There are several options to be considered in order to allow this situation to be resolved. Although,in case none of the method work, a software has to be used to recover the information on the hard disk.
Resolution steps:
In order to fix this problem a series of steps can be followed:
First see what the error message displays and find a suitable solution to the problem.
Clear CMOS and then reset the BIOS.
The power supply has to be checked as this might be one of the main reason for the problem to occur.
The connections inside the computer can be checked again.
Hardware inside the computer needs to be checked and whether they are compatible with the Operating system of the computer.
With the help of this small steps the problem might be solved; though if the problem continues then it would need the use of more sophisticated software which would allow data to be recovered. This software is very effective and ensures that the data can be brought back safely.
SHARE
