The Two-Handed Approach

• 1). Put the controller down in front of you, on a steady surface where you can reach the buttons.
  
  
• 2). Hold your two index fingers, side by side, roughly 1/2 inch to 1/4 inch over the button you want to press.
  
  
• 3). Tap the button using alternating fingers. Start slowly if you need to--the key is to make steady, even presses.
  
  

The One-Handed Approach

• 1). Put the controller down in front of you, on a steady surface where you can reach the buttons.
  
  
• 2). Hold your index finger over the button you want to press, but slightly closer to you, so your finger is coming down at roughly a 70-degree angle.
  
  
• 3). Bend your finger index slightly and press your thumb to it at the joint of your fingertip. This adds stabilization.
  
  
• 4). Clinch your remaining three fingers and tense up your entire arm until it vibrates slightly.
  
  
• 5). Lower your finger to the button, pressing it rapidly as your finger vibrates.