- 1). Park the vehicle in a location away from traffic. Turn the engine off, and disconnect the negative lead from the 12-volt battery.
- 2). Open the center console lid, and remove the rug on the floor of the console. Unscrew the two screws at the bottom that are now exposed.
- 3). Pull the cup holder trim from the front of the console by just pulling it off the clips. Unscrew two screws at the front lower sides of the console that are now exposed near the floor. Ignore the screws on the side in the middle of the console. They only secure the console shelf.
- 4). Tilt the entire console back. It will still be attached to all the wires for power, audio and other components. Unplug all wire connections, and lift the console out of the center housing.
SHARE
