- 1). Enter your Chevy Suburban with your ignition key and keyless remote in hand and close all of the doors and the trunk behind you.
- 2). Insert your key into the ignition and press and hold the unlock tab on the driver's side door. Be prepared to hold this tab through the following steps.
- 3). Cycle the key in the ignition from "On" to "Off" twice in a row, and then release the unlock tab on the driver's door. The Suburban's locks will now cycle to indicate the programming sequence.
- 4). Hold down the unlock and lock buttons on your keyless remote until the doors respond by cycling again.
- 5). Repeat Step 4 for each additional remote, waiting for the locks to cycle each time, and turn the key to the "On" position to end the programming sequence.
SHARE
