- If the rotor on your John Deere snowblower will not turn, you may have a broken or worn-down engine drive belt or auger belt, which you will need to replace. You may also have a broken shear bolt. If your snowblower does not have enough lift height, or the machine is not low enough, adjust the yokes on the frame and/or the lift lever. You can also move the J-bracket higher or lower, as needed. Your owner's manual (See References) will have instructions on how to make these replacements and do these adjustments.
- If your John Deere snowblower is operating erratically, you may have a damaged scraper blade or worn and/or broken belts. You'll need to replace them. In addition, adjusting the belt tension may also help your problem. If your belt is wearing out too fast or breaks, try adjusting the belt guides and adjusting the belt tension. Also check the idler alignment. Your owner's manual (See References) will provide instructions on how to do these adjustments.
- You can solve rear traction problems on your snowblower by installing weights to the machine or installing chains on your rear tires. If the life lever will not lock when it is in the raised position, adjust the yokes on the snowblower's frame. You can also adjust the yoke on the lift lever.
Rotor and Lift
Erratic Operation and Belt
Traction and Lift Lever
SHARE