- 1). Open the driver's door. This door needs to remain open for the entire procedure. Do not open any other doors.
- 2). Turn the ignition switch to the "ON" position. Do not start the vehicle. The remotes can not be programmed with the vehicle running.
- 3). Lock the doors to the vehicle by pushing the "LOCK" button on the driver's door. Make sure all of the doors lock; if all of the doors do not lock the procedure will not work properly.
- 4). Locate the remote receiver bulb in the ceiling of the vehicle. This is usually located toward the front of the ceiling.
- 5). Point the remote at the bulb.
- 6). Press and hold the "LOCK" button on the remote until the doors unlock. The remote is now programmed. Check the remote for proper operation.
SHARE
