- 1). Lay the uniform on a flat surface, face up and sleeves extended out. Unbutton the button at the end of the sleeve. Arrange the uniform so that the seams are all laying flat and there is no bunching.
- 2). Iron the uniform and the sleeves. Make sure that the arms are creased and flat. This will make the sleeve easier to roll and ensure a tight hold.
- 3). Insert your arm up into the inside of the sleeve. Grab and hold the fabric inside the sleeve at the halfway mark, or about the point where your elbow will be.
- 4). Pull the fabric out of the bottom of the sleeve, turning the sleeve inside-out and rolling up the bottom. The bottom of the sleeve should be rolled up to the armpit.
- 5). Straighten and iron the sleeve, creating a crease and flattening the fabric.
- 6). Fold the end of the sleeve in half again. Iron the sleeve, making a second crease and flattening the fabric.
- 7). Fold the sleeve a third time, placing the end of the rolled sleeve just below the base of the colored cuff. Straighten and iron the sleeve.
- 8). Fold the end of the cuff down over the rolled portion of the sleeve. This will hide the underside of the folded sleeve and complete the roll. Iron the cuff down, creating a crease to hold the rolled sleeve in place.
SHARE
