- 1). Place a standard head screwdriver, with the head taped, behind the center trim panel. Pry the panel away from the dashboard to dislodge the retaining clips on the back of the panel and remove the panel from the dashboard.
- 2). Unscrew the retaining screws with a Phillips head screwdriver, holding the radio to the dashboard.
- 3). Pull the radio from the dashboard. Unplug the two electrical connections from the back of the radio and remove the radio from the dashboard.
- 4). Position the replacement radio near the mounting hole in the dashboard and plug in the two electrical connections to the back of the radio.
- 5). Push the radio into the mounting hole in the dashboard.
- 6). Install the radio retaining screws with a Phillips head screwdriver.
- 7). Push the center trim panel into place, engaging the retaining clips on the back of the panel with the mounting holes on the dashboard.
SHARE
