- 1). Sit in the vehicle and close all doors. Lock the doors using the Lock button located on the driver's door.
- 2). Place the key in the ignition and then remove it completely. Do not turn the ignition with the key in it. Repeat this step six times in a row. Wait for the vehicle hazard lights to flash to signify that the vehicle has entered programming mode.
- 3). Reinsert the key into the ignition and turn it to the "ACC" position.
- 4). Press any button on the remote within five seconds of turning the key in the ignition. Wait for the hazard lights to flash to signify successful programming of the remote. Repeat this step with any other remotes at this time.
- 5). Turn the ignition to the "Off" position and remove the key from the ignition. Use the Unlock button on the driver's door to unlock the doors. Test the remotes from outside the vehicle.
SHARE
