- 1). Open the driver's side door of your 2000 Toyota Camry and leave the opened door unlocked. Close and lock all other vehicle doors.
- 2). Insert your key into the Camry's ignition cylinder and immediately remove it. Avoid turning the ignition while inserting and removing the key from the ignition cylinder.
- 3). Use the power locks on the control panel of the driver's side door to cycle the vehicle through five locking cycles. Press the "Lock" button followed by the "Unlock" button. Do this five times, pressing the buttons at a steady, even pace. Quickly close and open the Camry's driver's side door.
- 4). Press the "Lock" and "Unlock" buttons on the driver's door control panel to take the vehicle through another five locking cycles. Quickly insert the key into the Camry's ignition cylinder and turn the ignition "On," "Off," "On," "Off." Remove the key from the vehicle's ignition cylinder.
- 5). Wait for the vehicle's locks to cycle on their own, indicating that you have accessed the keyless entry remote programming mode.
- 6). Press and hold the "Lock" and "Unlock" buttons on the keyless entry remote for at least one second. Release the "Lock" and "Unlock" buttons, then press and hold the "Lock" button for two seconds. Note that the vehicle's locks will cycle to indicate that the keyless entry remote has been successfully programmed.
- 7). Close the driver's side door to complete the keyless entry remote programming process for your 2000 Toyota Camry.
SHARE
