- 1). Remove the top of a 1 gallon fuel container and pour 1/2 gallon of unleaded gasoline into the container.
- 2). Pour 3.2 ounces, or one measured container, of 40:1 ratio two-cycle engine oil into the 1 gallon container with the 1/2 gallon of gasoline.
- 3). Place the top on the fuel container and shake for one minute to thoroughly mix the fuel and oil. Slowly remove the top from the container.
- 4). Pour another 1/2 gallon of unleaded gasoline into the container and place the lid on securely. Shake the container for one minute to mix again.
- 5). Slowly remove the lid from the container. Open the filler cap on the Weed Eater trimmer. Pour the mixed fuel into the fuel tank on the trimmer. Pour the fuel slowly and use a funnel if desired. Avoid over filling the tank to prevent fuel from spilling out of the tank.
- 6). Place the filler cap back on the Weed Eater fuel tank. Place the lid on the fuel container.
SHARE