Troy-Bilt Pruner

• 1). Take the tree pruner and blade out of the package. Set them on the floor or on a workbench.
  
  
• 2). Separate the cover from the bottom of the blade to expose the mounting holes. Align the holes in the blade with the pins on the end of the pruner.
  
  
• 3). Set the clamp in place over the pin and the blade. Place the lock washer over the screw, then insert the screw into the clamp. Tighten the screw with the Allen wrench.
  
  

Corona Pruner

• 1). Take the tree pruner and blade out of the package. Set them on the floor or on a workbench.
  
  
• 2). Remove the nut on the pivot bolt from the pruner with the wrench. Unscrew the saw anchor screw with the screwdriver.
  
  
• 3). Place the pruner blade over the pivot bolt, then loosely tighten the nut by hand.
  
  
• 4). Align one of the holes in the blade with the hole for the saw anchor screw. Insert the saw anchor screw, and tighten it with the screwdriver.
  
  
• 5). Tighten the nut on the pivot bolt with the wrench.