Preparation

• 1). Scrape away rust and loose paint from the truck bed.
  
  
• 2). Sweep out debris and dirt.
  
  
• 3). Remove grease and oil with soap and water. Allow to dry
  
  
• 4). Scuff up the bed's surface with an etch pad or sandpaper, including where rust and loose paint were scraped off. Wipe down with acetone.
  
  
• 5). Apply masking tape and paper to areas to be kept free of application material.
  
  

Finish

• 1). Stir with drill mixing attachment while the product is in its container.
  
  
• 2). Pour liner product into the metal pan.
  
  
• 3). Paint the hard-to-reach surfaces first, such as the overhang of the bed sides, using the smaller brush to apply a light coating.
  
  
• 4). Apply a light coating of the product to the rest of the bed with a 4-inch brush or a roller. Allow to dry one to three hours.
  
  
• 5). Apply the product again with as heavy a coating as possible using brushes or rollers. Remove masking tape and paper about 15 minutes to an hour after the second coat is applied. Let dry completely.