Disassemble

• Remove as many parts as possible. This will help your sanding efforts, especially around the foot pedals and hard to reach areas of the piano. It will also protect the inside from sanding dust, finish remover and other debris that could fall in.
  
  

Protect the Inside

• The inside of your piano is delicate and should be protected from chemicals and debris. Cover it with a sheet or plastic protector. Clean the cord area before and after the refinishing.
  
  

Apply Finish Remover

• While using gloves, apply finish remover with a cloth over the surface of the painted portions. Allow it to set for five minutes, the scrape the old finish off. Rub the piano down with a dry cloth afterward.
  
  

Sanding

• Sand your piano down after using the finish remover. Sanding ensures that all the excess finish is smoothed away and will renew the appearance of the wood. Use a high-grit sandpaper once over, then rub over it with a fine-grit sandpaper to smooth the wood. Use a mechanical sander if you have access to one.
  
  

Stain or Paint

• Stains will give you an even color throughout the piano. Test the stain on an obscured area to make sure it has the desired effect. If you are painting, use a small brush. Stencil kits are available if you want to add a decorative touch such as scroll-work or initials.
  
  

Finish

• Apply your finish. Use a spray finish if possible, but if that is not an option use one you can brush or wipe on. Make sure your work area is dust free so that it will not get trapped in the finish. Give it at least a day to dry.